Click Fraud Protection
Alitherm Windows

Alitherm Windows

All Alitherm Windows utilise Smart’s innovative polyamide thermal break technology which creates a barrier between the cold air outside and the warm air inside. This technology significantly reduces thermal transmittance and enhances the overall U value of a product.
Alitherm Windows are available in a choice of standard or non standard colours, including metallic, dual colour and Smart’s unique Sensations range of textured finishes.

The Alitherm Windows series features the new Alitherm 300, Alitherm 600, Alitherm 700 and Alitherm 800, designed to meet the exacting requirements of Document L 2010. Designed for use as fixed lights and open out windows, internally or externally beaded, for domestic and light commercial applications.
Windows are manufactured according to customer requirements from a range of standard profiles, and are designed to incorporate a range of vent openings and various options.

The windows incorporate an internal pressure equalized drainage system, with concealed down drainage through a sub sill or frontal drainage with snap on cover caps/ hooded beads.

The outer frame is 47 mm deep with two 20 or 22 mm thermal break sections within the window profiles. Joints between frame members are formed by 45º mitred corners, reinforced with extruded aluminium cleats and stainless steel corner braces, and secured either by gluing and crimping or gluing and corner cleats. Mullions and transoms are secured using either stainless steel screws driven into integral screw ports within the sections, or cruciform cleats. All joints are sealed during construction.

Product tested to BS 6375-1 Weather tightness classification:
▪ Air permeability – Class C.
▪ Water tightness – 600 Pa.
▪ Wind resistance – 2400 Pa.Structural profiles are designed so that maximum deflection of any glass edge into a member under windload will not exceed 1/175 of the span, with no permanent deformation.

Horizontal framing members will restrict deadload deflection to 1/400 of span, up to a maximum of 3 mm. Fixing must ensure the window is retained securely within the opening without damage or distortion to the window frame. Generally, fasteners should be positioned 150 mm from each corner and each mullion/ transom, and at centres not exceeding 600 mm. All profiles are extruded from aluminium alloy (6060/6063 T5/T6) and comply with the recommendations of BS EN 12020-2:2001/ BS 755-9:2001. Thermal breaks are formed with polyamide strips (PA 6.6 25) reinforced with glass fibre sections capable of withstanding temperatures up to 200°C: they can be overpainted.

For more information and Quotes Call 02030 210955.

Get an Online Quote

Step 1 - Get Quote
Click above and fill in our online form for an instant quote emailed to you.
Step 2 - Expert Advice
Speak with one of our product specialists to finalise quote and delivery times.
Step 3 - Build Doors
All our products are tailor made for every job. You get the exact specifications you want.
Step 4 - Satisfaction
We issue a satisfaction questionnaire to ensure you are 100% satisfied with the installation.

We have had the pleasure of buying a 3 panel bi-folding door from Foldingdoorshop. Martin and his team were excellent to deal with before placing the order and until the unit had been installed. The doors arrived made exactly as per the order, the quality of the glass/frame/locks/seals /running gear is excellent.
Neil 11/11/2013